ElringKlinger honors its two best suppliers
Dettingen/Erms, September 21, 2021
ElringKlinger AG has honored its two best suppliers of the past year. In the « Raw Materials » category, the Spanish company Unica made a convincing showing. The French-based company Pirped International won the award for best supplier in the « Components » category. The award ceremony took place at the Group’s headquarters in Dettingen/Erms.
Unica is a Navarra-based company involved in the development of rubber compounds dating back to 1958. A business relationship with ElringKlinger has existed since 2010, during which time a total of around EUR 14.3 million in sales has been generated and 2,400 tons of material supplied. « Unica was able to impress in 2020 with an incredible rating of 99.5 percent. Orders were processed quickly and always delivered on time. Throughout 2020, there was not a single complaint on our part, as Unica always worked in a solution-oriented and cooperative manner. An exemplary performance, » says Bernd Weckenmann, Vice President Purchasing, describing the business relationship.
Pirped International, based in Chatou, France, supplied ElringKlinger with a total of 14.8 million screw bushings in 2020, which are used in cylinder head covers, for example. « Pirped International achieved a very good result and met our requirements by more than 90 percent. The company impressed us above all with its reliable delivery reliability and the very good quality of its products, » emphasizes Weckenmann. To achieve an even better result, Pirped International currently lacks the international environmental management standard ISO 14001, which sets out globally recognized requirements for an environmental management system.
ElringKlinger has long honored its best suppliers. The decisive factor for nomination is the assessment of various company departments such as purchasing, scheduling, logistics, quality management and materials planning. In total, the company is supplied by over 1,000 companies. There is also the possibility to be awarded several times as best supplier.
Source: https://www.elringklinger.de/en/press/pressreleases/23-09-2021
Pirped International is supplier of the year 2020 in the « Components » sector
PIRPED is nominated as the Exclusive Agent for the French Market
Thanks to our partnership with N+F Handelsgesellschaft mbH, one of the largest stockholders of flanges and piping materials in Europe. Each part is available on request with 3.1 certificates or 3.2 certificates from TÜV, DNV-GL, LRS, ABS, Rina, BV.
Flanges
For all requirements according to existing norms or customer’s specific demands.
Items according to EN1092-1 / DIN
Plain Flanges Type 01
Loose flanges, Type 02
Loose flanges, Type 04
Blind flanges Type 05
Welding neck flanges type 11 (also with reinforced S-dimension)
Slip-on flanges type 12
Threaded Flanges Type 13
Smooth waistbands type 32
Welding necks type 34
Welding neck flanges DIN 2631-2635, all DIN connection dimensions
Welding flanges to DIN 86041, 86044, 28117
Loose flanges DIN 86037
Special flanges according to drawing, as well as all prefabrications
Pressure levels:
From PN6 to PN400
Dimensions:
Up to DN1600
Materials:
S235JRG2, P250GH, 15Mo3/16Mo3, 13CrMo4-5, 11 CrMo9-10 (all alloyed parts with 3.2 TÜV), 1.4307, 1.4404, 1.4541, 1.4571, 1.4462, 1.4539, P280GH, P355NH, P355QH1
Sealing surfaces:
For all requirements according to customer specification
Coating, blasting, marking:
For all requirements according to customer specification
Items according to ASME
Technical standards:
B16.5, B16.47 series A+B, BS3293, B16.36
Designs:
Welding Neck Flanges
Blind Flanges
Slip-On Flanges
Threaded Flanges
Lap Joint Flanges
Orifice Flanges
Long Welding Neck Flanges
as well as special flanges according to drawing
Pressure levels:
From 150lbs to 2500lbs
Dimensions:
From 1/2″ to 48″
Materials:
A105-C21, A350LF2, P280, P250, F5, F11, F22, F91, A350LF2, P355QH1, 1.4401/F316, 1.4404/F316L, 1.4571/F316Ti
Sealing surfaces:
RF and RTJ sealing strip from stock.
For all requirements according to customer specification
Coating, blasting, marking:
For all requirements according to customer specification
Elbows & Steel Fittings
Items according to DIN / DIN EN 10253-2 / DIN EN 10253-4
Technical standards and designs:
Elbows according to DIN2605 part I+II (seamless and welded), or type A + B
T-pieces according to DIN2615 part I+II (seamless), or type A + B
Reducers, concentric and eccentric according to DIN2616 part I+II (seamless), or type A + B
Caps according to DIN2617
Branch saddles according to DIN2618
Weld-in elbows according to DIN2619
Tori spherical heads according to DIN28011
Special fittings according to drawing
Designs:
Types 2D, 3D, 5D, as well as according to customer specification
Wall thicknesses:
Standard and extra strong
Materials:
St37.0/P235TR1, St35.8/I+III/ P235GHTC1+TC2, 15Mo3/16Mo3, C22.8, TTSt 35N/V, HII/P265GH, 13CrMo44/13CrMo4-5, 10CrMo9-10, 12CrMo19-5, 1.4541, 1.4571
Dimensions:
Up to DN1600
Items according to ASME
Technical standards:
B16.9 and B16.28
Designs:
Elbows (seamless and welded)
T-pieces (seamless and welded)
Reducers, concentric and eccentric (seamless and welded)
Caps (seamless and welded)
Special fittings made of sheet metal, round steel and according to drawing
Elbow types:
Short radius (SR) and long radius (LR) as well as radii according to customer specification
Wall thicknesses:
Standard and extra strong
Material standards:
A234 Grade WPB, WP5, WP9, WP11, WP22, WP91 A420 Grade WPL 6, A403 Grade WP304L + WP316L
Dimensions:
From 1/2″ to 48″
Coating, blasting, marking:
For all requirements according to customer specification